Programming your HTC Android Device

Programming your HTC Android Device

 

The following final activation steps are intended for the HTC EVO, EVO 3D, EVO LTE, EVO Design 4G, EVO Shift, Hero & One M7 running the stock Android OS.

After the phone has been activated with ECO Mobile:

 

Hands Free Activation

If this is the first time activating your device, hands free activation automatically starts when you power it on for the first time.

 

1. With your device powered off, press and hold the Power key until the screen turns on.

2. Your device automatically enters hands free activation mode.

3. Tap OK.

4. Your device automatically installs available PRL updates.

5. Tap OK.

6. Your device restarts.

7. After it restarts, your device automatically checks for available firmware updates.

8. Tap Apply if an update is available. Otherwise, tap OK.

9. You’ve now completed hands free activation.

Note: If hands free activation fails, continue to the next guide.

 

One Touch Programming

If this is not the first time activating your device, or hands free activation did not complete successfully, use one touch programming.

 

1. From the home screen, tap Apps.

2. Scroll to and tap Settings.

3. Tap More.

4. Scroll to and tap System Update.

5. Tap Update Profile.

6. Your device automatically begins the Device Configuration.

7. After it completes, tap OK to return to the Settings screen.

8. Press the Home key.

9. You’ve now completed one touch programming.

Note: If one touch programming fails, continue to the next guide.

 

Manual Programming

 

Only use manual programming if both hands free activation and one touch programming did not complete successfully on your device.

Manually programming your device requires a 6-digit programming code and a 10-digit MSID. If your device was activated via www.ecomobile.com/activate, these codes may be found in the phone activation confirmation email or on the programming instructions page displayed after the activation was processed. These codes can also be found in the programming page on your web self care account.

 

1. From the home screen, tap Phone.

2. Dial ## followed by the 6-digit programming code followed by #. For example, ##123456#.

3. Tap Edit.

4. Tap MDN.

5. Enter the 10-digit phone number (MDN).

6. Tap OK.

7. Tap MSID.

8. Enter the 10-digit MSID.

9. Tap OK.

10. Tap the Back key.

11. Tap Done.

12. Your device restarts.

13. From the home screen, tap Apps.

14. Scroll to and tap Settings.

15. Scroll to and tap System Update.

16. Tap Update Profile.

17. After the update is complete, tap OK.

18. You’ve now completed manual programming.

 

Device Network Reset

Only reset your phones network settings if it was previously active using a different phone number (MDN).

 

1. From the home screen, tap Phone.

2. Dial ##72786#.

3. Tap Menu

4. Tap Reset

5. Enter the MSL Code
(provided to you in your activation email and/or your online account)

6. After it restarts, your phone will automatically enter the hands free activation mode.

7. After your phone activate, your device will restart.

8. After it restarts, your device automatically checks for available firmware updates.

9. Tap Apply if an update is available. Otherwise, tap OK.

10. You’ve now completed hands free activation.

 

Device Hard Reset

(All content and settings on the device will be lost)

1. From the home screen, tap Phone.

2. Dial ##786#.

3. Your phone restarts.

4. After it restarts, your phone is ready to be used.

5. You’ve now reset your phone.